Toshiba Strata CTX28 Programming Manual page 220

Services
540 Pilot DN Assignment
F
IELD
11 CF - All Call Record
12 CF - Busy Record
13 CF - No Answer Record
14 Direct Call
15 Retrieve Messages
16 Voice Main DN
17 Length of VM ID
18 SMDI Call ID Packet
19 SMDI ANI/CLID Digit
Length
1.
9-4
D
ESCRIPTION
Enter DTMF VM-ID prefix string for calls arriving to voice mail via "Call Fwd All
Calls."
Possible values: Up to 4 ASCII characters (default = 91)
Enter DTMF VM-ID prefix string for calls arriving to voice mail via "Call Fwd Busy."
Possible values: Up to 4 ASCII characters (default = 91)
Enter DTMF VM-ID prefix string for calls arriving at the voice mail via "Call Fwd No
Answer."
Possible values: Up to 4 ASCII characters (default = 91)
Enter DTMF VM-ID string for a call arriving at the voice mail as a Direct Call.
Possible values: Up to 4 ASCII characters (default = 91)
Enter DTMF VM-ID string for calls arriving at the voice mail to retrieve messages.
Possible values: Up to 4 ASCII characters (default = 92)
Use a VM Pilot DN as a transfer destination.
Possible values: Up to 7 ASCII characters (default = no value)
Select the number of characters in VM-ID string.
Possible values: 1~10 (default = 10)
Enable - to send SMDI Call ID DC packet on Voice mail calls.
Disable - do not send SMDI Call ID DC packet on Voice mail calls.
This feature requires Stratagy R5 or higher. It should be enabled when using multi-
language VM (French, English, etc.) or other VM adaptability features.
Possible values: Enable or Disable (default)
Enter the number of digits to be sent to on the SMDI packet for Class, CLID,, ANI,
and DNIS numbers.
Possible values: 2~20 (default = 10)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04