650 Behind Centrex Assignment
Prerequisite Program:
This feature allows Strata CTX to connect to the station side of a PBX or Centrex using a physical loop
trunk interface. DR and Least Cost Routing may need to account for access codes required by the PBX or
Centrex before connecting to the public network.
1. Complete the
"Behind Centrex
Assignment Record Sheet"
below.
2. Click Services > Miscellaneous > Behind
Centrex Assignment.
3. Click Submit.
F
IELD
00 OLG Number
01 Behind Centrex
02 Assume 9
03 Pause Timer
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
None
on
page D-52
D
ESCRIPTION
Select OLG that is attached to a Centrex (or other PBX).
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp.), (default = no value)
Enable Behind Centrex Operation for this OLG.
Possible values: Enable or Disable (default)
Enable the Assume 9 feature.
Possible values: Enable or Disable (default)
Enter the number of seconds (0~5) the CTX will wait for second dial tone from
Centrex/PBX.
Possible values: 0~5 (default = 0
Services
Strata Net QSIG Over IP
9-67