Lcr Route Plan Digit Analysis Assignment; Lcr Exception Number Route Plans - Toshiba Strata CTX28 Programming Manual

521 LCR Route Plan Digit Analysis Assignment

Prerequisite Program:
This program builds the basic LCR Analysis Table.
F
IELD
00 Analysis Digits
01 Route Plan Number

522 LCR Exception Number Route Plans

Prerequisite Program:
This command assigns up to 1280 dialed external digit strings to the Route Plan Exception Analysis Table
which assigns each string to 1 of 64 Route Choice Tables. The values expressed here are exceptions to the
values established in Program 521.
F
IELD
00Exception Route Plan Table
01Exception Route Plan
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
520 page 9-24
D
ESCRIPTION
Enter the external digit strings (area codes, toll prefixes, service codes, etc.) to be
assigned to a Route Plan Analysis Table.
Strings may be up to 32 digits long. There Route Plan Analysis Table may have 1280
members. A digit string can only be in one table at a time.
Possible values: Digits may include wild cards "X" and "N" where X = 0~9 and N =
2~9 (default = no value).
Enter the Route Plan number to which to assign the Analysis Digits.
Note
Entering 0 deletes the Analysis Digits from the table to which they had been
assigned.
521 page 9-25
D
ESCRIPTION
Enter the external digit strings (area codes, toll prefixes, service codes, etc.) to be
assigned to a Route Plan Exception Analysis Table.
Strings may be up to 32 digits long. The Exception Route Plan Analysis Table may
have 1280 members. A digit string can only be in one table at a time.
Possible values: Digits may include wild cards "X" and "N" where X = 0~9 and N =
2~9 (default = no value).
Enter the Route Plan Table in which to assign the Exception Digits.
Note
Entering 0 deletes the Exception Digits from the table.
Services
LCR/DR
9-25