Download Print this page

Advertisement

TOSHIBA CTX100 and CTX670 QUICK REFERENCE MANUAL
Hot Dialing
1. To make a call using Hot Dialing, dial 9 and the number.
2. When connected, you can continue speakerphone
operation or lift the handset and continue the
conversation
Spkr Button
1. To make a call, press
2. Dial the number.
3. When connected, you can continue to use the
speakerphone or lift the handset and continue the
conversation.
Handset
1. To make a call, lift the handset, then dial 9 and the number.
2. When connected, you can continue to use the handset
or switch to speakerphone by press
replacing the handset.
Answering a Call
. Lift the handset or press
.
If you don't have Ringing Line Preference: press the
flashing line or extension button and lift the handset.
Handsfree Answerback
.
To receive a handsfree internal call over the speakerphone
1. You hear a single long tone, then the caller.s voice. Do
not lift the handset; speak toward the telephone in a
normal voice.
2. Press
or take the handset off-hook if you wish to
Spkr
transfer the call or place it on hold.
.
To switch between Handset and Speakerphone
. Press
and place the handset on-hook to switch
Spkr
from Handset to Speakerphone mode.
Call Transfer
1. While on a call, press C
2. Dial the extension and announce the call or .blind
transfer. (hang up).
During call transfer, you can reconnect to the original
caller by pressing your flashing extension button.
Conference Calls
1. While on a call, press
2. Call another station or outside line.
3. When the called party answers, press
busy or there's no answer, press
to the original connection. All parties are conferenced.
4. Repeat the above steps to add more lines.
Note When the person who initiates the conference
(master) hangs up, control transfers to the first
internal station added to the conference. If no internal
stations are in the conference, the call disconnects.
.
Spkr
and
Spkr
.
Spkr
/T
NF
RN
.
Cnf/Trn
. If it.s
Cnf/Trn
Cnf/Trn
again to return
Page 1 of 4

Advertisement

loading

Summary of Contents for Toshiba CTX100

  • Page 1 TOSHIBA CTX100 and CTX670 QUICK REFERENCE MANUAL Hot Dialing 1. To make a call using Hot Dialing, dial 9 and the number. 2. When connected, you can continue speakerphone operation or lift the handset and continue the conversation Spkr Button 1.
  • Page 2 To conference two outside Lines 1. While talking on an outside call, press Cnf/Trn 2. Access an outside line. 3. After the party answers, press Cnf/Trn 4. If you receive a busy tone or if the station does not answer, press the flashing button to return to the original call.
  • Page 3 One Touch Buttons This feature is useful for storing frequently dialed numbers. To change a One Touch Button 1. Press #9876 to enter User Programming Mode. 2. Press the One Touch button to set. 3. Enter the digits or special buttons to be stored. 4.
  • Page 4 How to pick up a call on hold on another phone using the “Call Pick Up” button . Press “Call Pick Up” button . Press 01 (for line 1) and 10 (for line 10) How to do a 3 way conference call using the “Flash” button .

This manual is also suitable for:

Ctx670