Bipu-M And Ipt Program Update; Ftp Server Information - Toshiba Strata CTX28 Programming Manual

BIPU-M and IPT Program Update

To start updating the BIPU-M or IPT firmware, the Update firmware files must be stored on FTP Server
(see Appendix E – Software and Firmware Updates on page
WinAdmin. You cannot update BIPU-Q. If you need to update BIPU-Q, return it to Toshiba.
WinAdmin automatically disables the BIPU before any BIPU/IPT program update and preserves the initial
state of the BIPU (idle or disable) after program update is done.
The BIPU program update has two processing options: sequential and simultaneous. If the FTP server is a
CTX (SmartMedia), sequential processing must be used.
The IPT program update is performed sequentially only. A table sorted by BIPU shows a summary of the
IPT selection. You can select multiple IPTs. You can change the selection at any time before the update
process starts. The process flow is as follows:
The BIPU corresponding to the first group of IPTs is automatically disabled (if its current status is
•
"idle")
IPTs are updated one by one. Up to maximum 128 IPTs can be selected for one Updating process.
•
BIPU is re-enabled (if its initial state was "idle")
•
These steps are repeated automatically until the entire user selection is processed.
Both the BIPU and IPT update pages have an Abort and Abort All button. The Abort button is available per
item (BIPU, IPT), only when the current processing status allows the abort operation. Aborting the update
process is allowed only in two phases "Getting the update file" and "Resetting."
The Abort All button is available when an update is in progress. You can click on Abort All to abort all
updates starting with the one is currently processing. If abort operation is not allowed at the time, the
message "Please wait while system has a chance to abort..." appears. All program update processes will be
aborted when this is allowed by CTX.
The synchronization between WinAdmin and CTX is not perfect during this process. WinAdmin sends a
command, then checks for the completion of the command. If you click on Abort at the end of the "Getting
the update file" phase, WinAdmin will abort in the next phase that abort is allowed, which is resetting.

FTP Server Information

CTX SmartMedia
When FTP server is CTX-SmartMedia, the files for BIPU/IPT program update must be stored in
"PROGRAM" folder on SmartMedia. BIPU/IPT screens will automatically fill the Directory field in the
FTP information group using the name "PROGRAM," and will provide a list box with the files that exist in
this directory on Smart Media.
WinAdmin Machine
When FTP server is a WinAdmin machine, the WinAdmin installation will create a physical directory
under \WinAdmin. named "CTXIPUPDATE." This is the physical path that you should indicate when
creating "CTXIPUPDATE" virtual directory on the Default FTP Site. The files for BIPU/IPT program
update will be stored in "CTXIPUPDATE" directory on WinAdmin machine. BIPU/IPT pages will
automatically fill the Directory field in the FTP Server information group using the name
"CTXIPUPDATE" and will provide a list box with the files that exist in this directory on WinAdmin
machine.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
IP Telephone Programming
BIPU-M and IPT Program Update
E-1). You can update the BIPU-M using
8-9