Toshiba Strata CTX28 Programming Manual page 410

Telephone Button Programming
500 Series Programs
Table 13-35 Programs 500~577 (continued)
Button Sequence
530-03 LCR Action
A7" C‚yq
, n,
530-04 Digit Modification
Action
A7# C‚yq
, n,
530-05 Skip Length
A7$ C‚yq
, n,
531 DR Screening Table
for OLG
$" C‚yq
,
531-00 OLG
C‚yq
n,
531-01 Behind Centrex
Access Code
A7 C‚yq
, n,
531-02 Add or Delete Code
A7 C‚yq
, n,
531-03 DR Action for Centrex
A7" C‚yq
, n,
531-04 Skip Length
A7# C‚yq
, n,
531-05 Pause Insertion
A7$ C‚yq
, n,
532 DR Table Allow/Deny
Definition
$" C‚yq
,
532-00 DRL Number
C‚yq
n,
532-01 Table Type
A7 C‚yq
, n1,
533 DR Level Table
Assignment
$"" C‚yq
,
533-00 DRL Number
C‚yq
n,
533-01 Dial String
A7 C‚yq
, n1,
533-02 Add or Delete
A7 C‚yq
, n2,
13-86
Value(s)
n = 1. Apply (default)
2. Skip and Apply
n = 1. Apply (default)
2. Retain
3. Discard
n = 0~5
C‚yq
, 0 = delete (default = 0)
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
n = Up to 8 digits
n = 1. Add
2. Delete (default)
n = 1. Bypass (default)
2. Skip and Apply
n = 0~8
(default = 0)
n = 0~10
(default = 0)
C‚yq
,
n = Up to 8 digits
n1 = 1. Allow
2. Deny (default)
C‚yq
,
n = Up to 16 digits
n1 = 1~ 7 digits may include
wild cards "X" and "N"
where X = 0~9 and N =
2~9.
n2 = 1. Add
2. Delete (default)
C‚yq
,
Select LCR Action.
•
Apply – (default) Apply LCR to all of the external dialed digits.
•
Skip and Apply – Apply LCR to the dialed digits excluding the
number of digits specified in Skip Length.
Select Digit Modification application.
•
Apply – (default) Apply Digit Modification from the first digit.
•
Retain – Retain the skipped digits and apply Digit Modification
starting from the next digit specified by Skip Length.
• Discard – Discard the skipped digits and apply Digit Modification
starting from the next digit specified by Skip Length.
Specify the number of digits at the beginning of the dial string
to be ignored before DR, Digit Modification, or LCR is applied.
Assigns DR Screening Table for an OLG. Up to four codes may be
assigned per line group. Used for outgoing calls other than LCR.
Enter the OLG Number.
Enter the access code expected by an attached Centrex PBX.
Add or Delete the Code entered above. Leaving the field empty
removes an existing code. Activation requires entries in OLG Group
number and 01 Behind Centrex Access Code above.
Apply DR to the dialed digits.
•
Bypass (default) – does not apply DR.
•
Skip and Apply– applies DR to the dialed digits excluding the
number of digits specified in Skip Length.
Enter the number of leading digits to be ignored by DR.
Enter the length of the pause to be inserted between dialing digits.
Specify the DR Table Type using this command.
Select the DRL Number.
Specify whether this DR Table is an Allow Table or Deny Table.
This program adds or deletes entries in the DR Table associated with
the DRL entered in above.
Enter the DRL for which you want to populate an Exception Table.
Add the dial string you wish to be treated as an exception.
Add or delete the string entered in 01 DR Exception Table above to
the DR Exception Table.
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Summary