Bipu Configuration - Toshiba Strata CTX28 Programming Manual

IP Telephone Programming

151 BIPU Configuration

151 BIPU Configuration
This program is used to set up the IP address of the specific BIPU card to support the IP-Telephone. BIPU
card must be assigned before configuring the specific BIPU card.
1. From the Program Menu, click IP-
Telephone > BIPU Configuration.
The BIPU Configuration screen
displays (shown right)
2. Enter Program 151 data.
3. Click Submit.
F
IELD
Cabinet & Slot Number
IP Address
Subnet Address
Default Gateway Address
Version Number of BIPU
8-4
D
ESCRIPTION
Enter the cabinet and slot number of the BIPU to be configured.
Note: BIPUs must first be installed using PRG100 - System\Card
Assignment.
BIPUs can be installed in the slots listed:
Possible values: Slots 01-08 (CTX100 and CTX670 Basic), 01-06
(CTX670 Exp).
Enter the BIPU IP Address.
Enter the Subnet Address of the BIPU.
Enter the Default Gateway Address of the BIPU card.
This is a read-only field.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
6550