Voice Mail Port Data - Toshiba Strata CTX28 Programming Manual

580 Voice Mail Port Data

Prerequisite Program:
Assign characteristics of individual voice mail ports.
1. Complete the "Voice Mail Port
Data Record Sheet"
2. Click Services > Voice Mail >
Voice Mail Port Data.
3. Enter a VM Port DN
...or click one of the following
buttons:
• List – view a summary list of
programmed VM Port DNs.
• Copy – Enter an VM Port DN
value in the field with the same
name. Click Copy to make a
new VM Port DN assignment
with settings copied from the Port entered in VM Port DN.
4. Enter Program 580 data.
5. Click Submit.
F
IELD
00 VM Port DN
01 Control Method
02 Send A/D Tone
03 Send B Tone
04 End-to-end
07) VM to VM Call Blocking
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
None
on page D-39.
D
ESCRIPTION
Enter the DN of an individual VM port. For direct transfer to voice mail, enter the
remote Node ID and Pilot DN.
Note Do not enter a Pilot DN. This feature is available only with CTX Release 1.3
or higher software and with CTX WinAdmin Release 1.3 or higher software.
Possible values: Up to 5 digits (default = no value)
Specify In-band or SMDI integration. Select SMDI for Remote voice mail.
Possible values: Inband or SMDI (default = no value)
Select whether Strata CTX sends A or D tone when a station connecting to
voice mail answers or disconnects.
Possible values: Enable or Disable (default = no value)
Enable Strata CTX to send B tones in the event of a Blind Transfer Recall.
Possible values: B Tone, No Tone or B Tone and Extension Number (default =
no value)
Enable Strata CTX to send DTMF tones to voice mail in response to key
presses from a digital telephone.
Possible values: Enable or Disable (default = no value)
Set to blocking to prevent Voice Mail Auto Attendant, supervised transferred,
calls from forwarding back into Voice Mail.
Possible values: Blocking or Non-blocking (default)
Services
540 Pilot DN Assignment
9-5