Multiple Piou, Pious, Installation - Toshiba strata CT Installation & Maintenance Manual

Non-built-in Auto Attendant Installation

Multiple PIOU, PIOUS, Installation

H
C
1
Install PIOU or PIOUS PCBs in the last (highest numbered) slot in any cabinet(s).
2
SMDR, Page Outputs, Relay controls, Alarm Sensor, and other miscellaneous options on PIOU or PIOUS will be
active on the installed PIOU/PIOUS that is programmed with the lowest Program 03 code (41, 42, or 43).
3
If set, RSIU/RSIS Program 76 will override Program 03 code 41, 42, and 43.
4
Stratagy uses straight cables.
Figure 6-26
Strata CT I&M Manual October 2000
Non-integrated AA sources, such as voice mail devices and stand-alone units, connect to
standard telephone circuits (ports). See
information.
Up to three PIOU or PIOUS PCBs can be installed in a system to simultaneously provide:
maintenance terminal (or modem) interface, Management Information System (MIS) for
ACD interface, and RS-232 voice mail interface (Toshiba proprietary or SMDI).
Each of these interfaces are provided by the modular jacks on separate PIOU, PIOUS PCBs.
Interface assignments are made in Program 03 (Code 41, 42, and 43). PIOU and PIOUS
Paging, SMDR, relay control, alarm sensor, and door lock functions will be active only on the
PIOU or PIOUS PCB which is assigned the lowest Program 03 code (41, 42, or 43).
If the RSIU/RSIS is installed, functions enabled in Program 76 will operate as programmed
and the same functions programmed in Program 03 (Code 41, 42, and 43) will not operate.
For more details regarding RSIU/RSIS/RMDS installation, see RSIU installation in
Chapter 3 – Universal Slot PCBs
RS-232 (DB-25 OR DB-9) Serial Port
Maintenance Terminal,
Personal Computer,
Modem
RS-232 (DB-25 OR DB-9) Serial Port
COM Port
ACD/MIS
Personal Computer
Multiple PIOU/PIOUS (Remote Maintenance, MIS for ACD, RS-232 Voice Mail
Integration)
Chapter 4 – Universal Slot PCB Wiring
and Figure 4-21 on
3-Pair
PIOU or PIOUS
Modular Cord
TTY Jack
2
SMDR
TTY-PC-CABLE
or
PPTC1A-3M
3-Pair
PIOU or PIOUS
Modular Cord
TTY Jack
2
SMDR
TTY-PC-CABLE
or
PPTC1A-3M
Peripheral Installation
Page 4-22.
1
Jack
Maintenance Interface
Program 03
Code 41
1
Jack
MIS for ACD Interface
Program 03
Code 42
for more
6-53