Toshiba Strata CTX28 Programming Manual page 354

Telephone Button Programming
200 Series Programs
Table 13-14 Programs 200~202 (continued)
Button Sequence
200-23 Travelling COS
Change
A7!" C‚yq
, n,
200-24 TGAC Override
A7!# C‚yq
, n,
200-25 Service Tones
A7!$ C‚yq
, n,
200-26 Call Waiting and ROB
Tone
A7!% C‚yq
, n,
200-27 Name Display
A7!& C‚yq
, n,
200-28 Door Ovr DND
A7!' C‚yq
, n,
200-29 Emergency Ringdown
A7!( C‚yq
, n,
200-30 Change System
Speed Dial
A7" C‚yq
, n,
200-31 Network COS
A7" C‚yq
, n,
200-32 Auto OCA
A7"! C‚yq
, n,
200-33 Originate OCA
A7"" C‚yq
, n,
200-34 RSTU Supervision
A7"# C‚yq
, n,
200-35 Station Speed Dial
Bins
A7"$ C‚yq
, n,
200-39 CO Park & Hold
A7"( C‚yq
, n,
200-40 Stutter Dial Tone
A7# C‚yq
, n,
13-30
Value(s)
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Override
2. Do not Override
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1~32
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
n = 1. Received
2. Not Received
n = 0~100
n = 1. Enable
2. Disable
n = 1. Enable
2. Disable
Privilege to change the Travelling Class of Service Override Code.
Trunk Group Access Code Over Ride (for Attendant console) (Not
available in R1).
Disable Services Tone for Data Privacy. Service tone, such a Call
Waiting Tone, should be disabled for modems, FAXes, and similar
devices.
Enable/Disable the station to receive Call Waiting (Campon) and Ring
Over Busy Tone. CW tone is always two beeps. ROB tone can be two
beeps or continuous as set in PRG 204, 27.
Privilege to put the user name in the list display of Large LCD
(Directory Assistance)
Enable DND override by door phone.
Enable Emergency ringdown.
Privilege to use System Speed Dial.
Network COS number.
OCA occurs automatically when making a call to a busy station that
allows OCA calls to be received.
The privilege to make OCA calls to other stations.
Devices connected to RSTU circuits that do not automatically hang
up, and connect to CO lines that do not provide disconnect
supervision, should be set with "Not Received." This enables the auto
disconnect Tandem timer in PRG 104, PB06 for these types of
Connections.
The number of station speed dial bins allocated to this station
(maximum=100 per station).
Enabled: When this station parks a line call, CO or GCO buttons of
the parked line that appear on other stations will be on hold. This will
allow the other stations to press the CO or GCO button to pickup the
parked call.
Disabled: When this station parks a line call, CO or GCO buttons of
the parked line that appear on other stations will appear busy. This
will prevent the other stations to press the CO or GCO button to
pickup the parked call.
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
Enable: This station will receive stuttered dial tone when it has a
station-to-station or Voice Mail message waiting, or if DND is set. This
feature is available with Strata CTX R1.3 software.
Disable: This station will receive normal dial tone when it has a
station-to-station or Voice Mail message waiting, or if DND is set.
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Summary