Set Up Users For Ctx Winadmin Access - Toshiba Strata CTX28 Programming Manual

Step 6: Set Up Users for CTX WinAdmin Access
Prior to CTX WinAdmin V2.10G, only Microsoft® Windows® XP or Windows 2000 Administrators
could use CTX WinAdmin to make changes. After CTX WinAdmin V2.10G has been installed, you can
enable CTX WinAdmin access to Windows Users who are members of the Windows Administrator's
group.
Users who are logged in to Windows on accounts that are not members of the Administrators group will
also be able to use all features of the WinAdmin application including connection to CTX via dial-up
networking. The only exception is that these non-Administrator users cannot modify the User Profile.

Set Up Users for CTX WinAdmin Access

After CTX WinAdmin has been installed, you can enable CTX WinAdmin access to Windows Users who
are members of the Windows Administrator's group. Prior to CTX WinAdmin V2.10G, only
Administrators could use CTX WinAdmin to make changes.
1. Go to the Windows Start button > Control Panel >
Administrative Tools > Component Services.
2. Locate and open My Computer >
COM+ Applications.
3. From the COM+ Applications folder, right click
on IIS-{default web site/root/ctmc_Local}. Select
Properties > Identity tab, then select "This User"
(change from Interactive User).
4. Enter or browse and locate a Windows User name
(User must be a member of the Windows
Administrator group). Enter a password, and re-
enter the password in the Confirm box. Click OK.
5. Click on "x" in the upper right corner to close out
of Windows. The Windows User entered in the
previous step can now access CTX WinAdmin.
Step 7: Exit CTX WinAdmin
1. From the Program Menu, click Home.
2. Click on Exit at the CTX Management Console page.
3. Close your browser.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
Installation
Set Up Users for CTX WinAdmin Access
3-21