Emergency Call Destination Assignment - Toshiba Strata CTX28 Programming Manual

400 Emergency Call Destination Assignment

Prerequisite Program:
This command assigns Emergency Call destinations to Emergency Call groups. There is one group for
each Day mode (Day1, Day2 and Night).
1. From the Program Menu, click
Attendant > Emergency Call. The
Emergency Call screen displays
(shown right).
2. Enter Program 400 data.
...or click one of the following
buttons:
• Insert – assigns the destination
for the selected index.
• Modify – assigns a new
destination to the selected
index.
• Remove – removes the
assigned destination from the
table.
3. Click Submit.
F
IELD
01 Day/Night Mode
02 Called Number Index
03 Emergency Call
Destination
04 Action
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
None
D
ESCRIPTION
Select the time of day mode (Day1,Day2,Night) from the table below.
Possible values: Day1, Day2, Night (default = no value)
Emergency Call Group Number (1~4). The system will hunt through these in
numerical order to find an available emergency destination.
Possible values: 1~4 (default = no value)
Enter the DN, Pilot Number or Private Number to be associated with the Called
Number Index.
Possible values: Up to 32 ASCII characters (default = no value)
Choose whether you are replacing an existing Emergency Number Index or
inserting one in the list. If inserting, the new entry will assume the specified
index. The remaining indices will be increased by one and the last one, 4, will
be deleted.
400 Emergency Call Destination Assignment
Attendant
7-3