Isdn Station Data - Toshiba Strata CTX28 Programming Manual

217 ISDN Station Data

Prerequisite Program:
Set ISDN Station parameters to define ISDN capabilities.
1. Complete the "ISDN Station Data
Record Sheet"
2. From the Program Menu, click
Station > ISDN > Station Data.
The ISDN Individual Station Data
Assignment screen displays
(shown right).
3. Enter a Primary DN for an
existing record
...or click one of the following
buttons:
• List – view a summary list of
programmed Hunt Groups.
• Copy – Enter a DN in the Primary DN field and click Copy to make a new DN assignment with BRI
Station settings copied from the DN entered in the Primary DN field.
4. Set up ISDN Station Data using the Program Detail table below.
5. Click Submit.
F
IELD
Primary DN
01 Station Name
02 Dial Method
03 System Call Forward
04 CF Password
05 Door Phone Override
DND
06 Emerg Call Group
07 COS Override Code
08 Display DN
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
202 page 5-37
on page D-20.
D
ESCRIPTION
Enter Primary DN.
Possible values: Up to 5 digits (default = no value)
Enter a name for this station.
Possible values: Up to 9 ASCII characters (default = no value)
Select the audible tone when dialing.
Possible values: Dial Tone (default), Entry Tone or No Tone
Select the System Call Forward assignment for this station.
Possible values: 0~32 (default = 0)
Protect the System Call Forward settings by creating a password.
Possible values: Up to 4 digits (default = no value)
Enable the Door Phone ringing indicator to override Do Not Disturb.
Possible values: Enable or Disable (default)
Select this station's emergency call group.
Possible values: 1~8 (default = 1)
Enable Class of Service override.
Possible values: Enable or Disable (default)
Enter the DN to be displayed on the LCD.
Possible values: Up to 5 digits (default = no value)
Station
ISDN
5-41