Replacement 24 LEFT COVER (PL1.1.7)
3)
2)
1)-2
1)
Insert the front side of the LEFT COVER between the FRONT COVER and the printer, and
mate the two front side hooks of the LEFT COVER with the printer.
2)
Mate the holes on the LEFT COVER with the two bosses on the printer.
3)
Secure the LEFT COVER to the printer using the three screws (silver, tap, 10mm).
Next Replacement steps.
Replacement 33 RIGHT COVER (PL1.1.6) or Replacement 34 REAR COVER (PL1.1.4)
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
3)
2)
1)-1
1)-1
3)
3 - 146
1)-1
Zna03092KA