Dell 3130cn Service Manual page 329

Step
Checking after replace the FUSER ASSY. (Refer to
4 Removal 8/Replacement 36.)
Is the partial deletion in Tail Edge printed?
Checking the print cartridge.
5
Is the installed print cartridge the DELL cartridge?
Checking the paper
6
Is the installed paper with the new and dry one?
Checking the surface of TRANSFER ASSY.
7 Are there any damages on the surface of TRANSFER
ASSY?
Checking the high voltage terminal of the TRANSFER
ASSY.
Open the Front Cover, check the terminals.
8
Are the terminals clean?
This partial deletion is called as "smudge".Can be seen A4 size and half tone print.
The partial deletion sample of Tail Edge is shown below.
Tail Edge
Version 3 2008.05.30
Check
1 - 303
Yes
Replace the
Printer.
Go to step 6.
Go to step 7.
Replace the
TRANSFER
ASSY. (Refer to
Removal 4/
Replacement 40)
Replace the
printer.
- Sample-1
Partial deletion sample of Tail Edge.
- Sample-2
Partial deletion sample of Tail Edge.
Chapter 1 Troubleshooting
No
End of work.
Replace to DELL
cartridge.
Replace to the
paper with the
new and dry.
Go to step 8.
Clean up the ter-
minals.
Zna05000KA