Replacement 48 HARD DISK (PL9.1.47)
Use a wristband to protect the HDD from electrostatic damage.
1)
Mate the two bosses on the HARD DISK with the holes on the printer, and then replace the
HARD DISK to the ELECTRONIC SUB-SYSTEM CONTROL BOARD.
2)
Secure the HARD DISK to the printer using the two SCREW KNURLINGs (PL9.1.22).
3)
Close the SHIELD WINDOW and secure the SCREW KNURLING.
Version 3 2008.05.30
2)
2)
Chapter 3 Removal and Replacement Procedures (RRPs)
1)
3)
3 - 182
Zna03333KB