Dell 3130cn Service Manual page 446

Item
MSI TURN CLUTCH ON
MSI FEED CLUTCH ON
Version 1 2007.12.28
1) Turn on the power and enter the CE Diag.
2) Execute the MSI TURN CLUTCH ON. Upon hitting the Start
button, the operating noise of the clutch will be heard.
3) Click the stop button to stop the clutch.
Combination test is as follows.
NOTE: The MPF turn roll rotates when the PH MOTOR ON (FULL)
and the MSI TURN CLUTCH ON are executed. This procedure is for
the technical staff.
1) Turn on the power and enter the CE Diag.
2) Remove the Tray 1 paper cassette.
3) Execute the PH MOTOR ON (FULL) and the MSI TURN
CLUTCH ON.
4) Confirm the Turn Roll rotation.
5) Click the stop button to stop the clutch.
6) Replace the Tray 1 paper cassette.
1) Turn on the power and enter the CE Diag.
2) Execute the MSI FEED CLUTCH ON. Upon hitting the Start
button, the operating noise of the solenoid will be heard.
3) Click the stop button to stop the solenoid.
Combination test is as follows.
NOTE: The MPF feed roll rotates when the PH MOTOR ON (FULL)
and the MSI FEED CLUTCH ON are executed. This procedure is for
the technical staff.
1) Turn on the power and enter the CE Diag.
2) Remove the Tray 1 paper cassette.
3) Execute the PH MOTOR ON (FULL) and the MSI FEED
CLUTCH ON.
4) Confirm the Feed Roll rotation.
5) Click the stop button to stop the clutch.
6) Replace the Tray 1 paper cassette.
2 - 92
Chapter 2 Operation of Diag.
Confirmation procedure
MPF Turn Roll
MPF Feed Roll
Kmy02029KA
Kmy02030KA