Replacement 17 Shield Mcu (Pl9.1.42) - Dell 3130cn Service Manual

Replacement 16 DRIVE ASSY K (PL8.1.10)
6)-2
6)-2
6)-2
5) Route the harness of the K Mode Sensor in the DRIVE ASSY K into the inside through the
hole of the frame.
6) Engage the connector (P/J20) of the K Mode Sensor to the MACHINE CONTROL UNIT, and
then fix the harness using the six clamps.
Go to the next replacement step:

Replacement 17 SHIELD MCU (PL9.1.42)

Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
5)
6)-2
3 - 129
6)-1
6)-2
6)-2
Zna03315KB