Fip1.44 Load Tray N Or Mpf 024-965/024-966/024-969 - Dell 3130cn Service Manual

FIP1.44 Load Tray N or MPF 024-965/024-966/024-969

Step
Possible causative parts:
HARN ASSY R SIDE (PL10.1.15)
HARN ASSY REGI SNR (PL3.2.37)
HARN ASSY C2 CHUTE (PL12.2.7)
HARN ASSY C2 NO PAPER (PL12.3.30)
HARN ASSY FDR UNIT (PL12.2.3)
HARN ASSY MSI NPP (PL3.1.17)
SENSOR PHOTO (CST NO PAPER SENSOR) (PL3.2.30)
SENSOR PHOTO (CST NO PAPER SENSOR)
(PL12.3.14)
SENSOR PHOTO (MSI NO PAPER SENSOR) (PL3.1.15)
PWBA OPT FDR (PL12.2.6)
PWBA MCU (PL9.1.20)
Checking the paper
1
Is there the paper in the specified tray or the cassette?
Checking the paper size
Check the paper size below.
- Paper in the cassette or the tray
2
- Paper size setting through the control panel
- Paper size of the printing job
Are these paper sizes the same?
Checking the paper type
Check the paper type below.
- Paper in the cassette or the tray
3
- Paper type setting through the control panel
- Paper type of the printing job
Are these paper types the same?
Checking after reseating the CASSETTE ASSY 250 or 550
4 Reseat the CASSETTE ASSY 250 or 550.
Does the error still occur when printing?
Checking the ACTUATOR NO PAPER A4 for operation
5
Does the ACTUATOR NO PAPER A4 operate smoothly?
Checking the SENSOR PHOTO (CST NO PAPER) for
operation
Does the number on the screen increase by one, every
6 time the actuator of the SENSOR PHOTO (CST NO
PAPER) is operated?
Checked by [Digital Input] - [DI-11(Control Panel)/CST1
NO PAPER(PC)] in diagnosis.
Checking the ACTUATOR NO PAPER A4 for operation
7
Does the ACTUATOR NO PAPER A4 operate smoothly?
Version 1 2008.02.15
Check
1 - 241
Chapter 1 Troubleshooting
Yes
Go to step 2. Load the paper.
paper, paper size
Go to step 3.
setting or printing
For Tray;
Go to step 4. paper, paper type
For MPF: setting or printing
Go to step 9.
For Tray 1:
Go to step 5.
For Tray 2:
Go to step 7.
Go to step 6. ACTUATOR NO
Replace the
PWBA MCU.
(Refer to Removal
30/Replacement
14)
Go to step 8. ACTUATOR NO
No
Change the
job.
Change the
job.
End of work
Replace the
PAPER A4.
Go to step 11.
Replace the
PAPER A4.