Fip1.62 Ready To Print 010-421 - Dell 3130cn Service Manual

FIP1.62 Ready to Print 010-421

Step
Possible causative parts:
FUSER ASSY (PL6.1.10)
PWBA MCU (PL9.1.20)
Checking the life counter value of the FUSER ASSY.
1
Does the life counter value show the near of the end?
Checking the FUSER ASSY for installation
Is the FUSER ASSY installed correctly?
2
Warning: Start the operation after the FUSER ASSY
has cooled down.
3 Does the error still occur when the power is turned ON?
Checking after replacing the FUSER ASSY
Replace the FUSER ASSY. (Refer to Removal 8/Replace-
ment 36)
4
Warning: Start the operation after the FUSER ASSY
has cooled down.
Does the error still occur when the power is turned ON?
Version 1 2008.02.15
Check
1 - 262
Chapter 1 Troubleshooting
Yes
Replace the
FUSER ASSY.
(Refer to Removal
8/ Replacement
36.) After replace-
ment, be sure to
clear the life
counter value.
Go to step 4. FUSER ASSY,
then go step 3.
Go to step 4.
Replace the
PWBA MCU.
(Refer to Removal
30/Replacement
14)
No
Go to step 2.
Reseat the
End of work
End of work