Dell 3130cn Service Manual page 502

Removal 14 FRONT COVER (PL1.2.98)
9)-1
9)-2
11)
8) Open the MPF COVER (PL1.2.24).
When performing the step described below, take care not to drop and break the FRONT
COVER.
9) Release the hook of SHAFT PIVOT (PL1.2.8) on the left and right sides of the FRONT
COVER, and then pull out the SHAFT PIVOT to the outside while holding the FRONT
COVER. Remove the FRONT COVER from the LINK L (PL7.1.3) and LINK R (PL7.1.13) on
the printer.
10) Release the hook of the SHAFT PIVOT MSI (PL1.2.30) that fixes the left and right sides of the
FRONT COVER and the MPF COVER to the printer, and then pull out the SHAFT PIVOT
MSI to the inside.
11) Remove the FRONT COVER together with the MPF COVER.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
10)-1
10)-2
9)-3
8)
3 - 25
9)-3
9)-2
9)-1
10)-1
10)-2
Zna03026KB