Dell 3130cn Service Manual page 499

Removal 13 OPERATOR PANEL (PL1.2.97)
12) Remove the SPRING LATCH (PL1.2.3) from the hooks on the LATCH FRONT (PL1.2.4) and
the FRONT COVER.
13) Remove two screws (silver, with flange, tap, 10mm) that fix the LATCH FRONT to the
FRONT COVER.
14) Slide the LATCH FRONT to the left, and then remove the LATCH FRONT from the FRONT
COVER.
15) Remove the four screws (silver, tap, 10mm) that fix the COVER HARNESS (PL1.2.5) to the
FRONT COVER.
Take care not to move the COVER HARNESS away from the FRONT COVER too far
because the COVER HARNESS is secured to the HARNESS ASSY FRONT COVER.
16) Remove the COVER HARNESS from the FRONT COVER.
17) Remove the HARNESS ASSY OPEPANE from the FRONT COVER.
Version 1 2008.01.08
15)
15)
15)
16)
15)
Chapter 3 Removal and Replacement Procedures (RRPs)
12)
13)
17)
3 - 22
14)
13)
Zna03123KA