Fip1.42 Paper Jam 077-907 - Dell 3130cn Service Manual

FIP1.42 Paper Jam 077-907

Step
Possible causative parts:
CHUTE ASSY EXIT OUT (PL6.1.1)
CHUTE DUP GATE (PL6.1.13)
FEEDER ASSY DUP (PL11.1.1)
DRIVE ASSY PH (PL8.1.7)
CLUTCH ASSY PH TURN (PL3.2.25)
HARN ASSY R SIDE (PL10.1.15)
HARN ASSY DUP UNIT (PL11.1.18)
HARNESS ASSY FRONT COVER (PL1.2.11)
PWBA DUP-H (PL11.1.15)
PWBA MCU (PL9.1.20)
Checking the COVER ASSY FRONT for latching
Open and close the COVER ASSY FRONT, then check the
1
latching.
Does the error still occur when printing?
Checking after reseating the FUSER ASSY
Reseat the FUSER ASSY.
2 Warning: Start the operation after the FUSER ASSY
has cooled down.
Does the error still occur when printing?
Checking after reseating the FEEDER ASSY DUP
3 Reseat the FEEDER ASSY DUP.
Does the error still occur when printing?
Checking the CHUTE DUP GATE for the shape and installation
4 Are the shape and the installation of the CHUTE DUP
GATE normal?
Checking the CHUTE ASSY EXIT OUT for shape and
installation
5
Are the shape and the installation of the CHUTE ASSY
EXIT OUT normal?
Checking the SENSOR PHOTO (DUP JAM SENSOR) for
operation
Does the number on the screen increase by one, every
6 time the actuator of the SENSOR PHOTO (DUP JAM
SENSOR) is operated?
Checked by [Digital Input] - [DI-1(Control Panel)/DUP
SNR(PC)] in diagnosis.
Checking the CLUTCH DUP for operation
Does the CLUTCH DUP operate properly?
7
Checked by [Digital Output] - [DO-35(Control Panel)/
DUPLEX CLUTCH ON(PC)] in diagnosis.
Version 1 2008.02.15
Check
1 - 236
Chapter 1 Troubleshooting
Yes
Go to step 2. End of work
Go to step 3. End of work
Go to step 4. End of work
Reseat or replace
Go to step 5. the CHUTE DUP
Reseat the
CHUTE ASSY
EXIT OUT.
If broken, replace
Go to step 6. the CHUTE ASSY
EXIT OUT.
(Refer to Removal
9/Replacement
Go to step 7. Go to step 11.
Go to step 8. Go to step 11.
No
GATE.
35)