Dell 3130cn Service Manual page 455

Item
K MODE CLUTCH ON
(Color Mode Switching Sole-
noid)
Version 1 2007.12.28
NOTE:This procedure is for the technical staff.
When performing operation for five minutes or longer with the front
cover open, remove all toner cartridges, and cover the drum to avoid
exposure to light.
1) Open the Front Cover.
2) Remove the Cover Rear.
3) Remove the Cover Side R Assy.
4) Remove the Drive Assy K.
5) Cheat the Safety Interlock System.
6) Turn on the power and enter the CE Diag.
7) Execute the K MODE CLUTCH ON.
8) Check the K MODE SOLENOID movement.
9) Click the stop button to stop the test.
10) Replace the Safety Interlock System.
11) Replace the Drive Assy K.
12) Replace the Cover Side R Assy.
13) Replace the Cover Rear.
14) Close the Front Cover.
2 - 101
Chapter 2 Operation of Diag.
Confirmation procedure
K Mode Solenoid
Zna02051KA