Replacement 10 HIGH VOLTAGE POWER SUPPLY (PL5.1.17)
5)
Route the harness of the HIGH VOLTAGE POWER SUPPLY to the printer and pass the con-
nector into the hole on the SHIELD REAR.
6)
Engage the connector (J16) of the HIGH VOLTAGE POWER SUPPLY to the connector (P16)
of the MACHINE CONTROL UNIT.
Go to the next replacement step:
Replacement 13 TOP COVER (PL1.1.1)
Version 1 2008.01.08
Chapter 3 Removal and Replacement Procedures (RRPs)
5)
6)-2
6)-1
3 - 118
Zna03106KA