Dell 3130cn Service Manual page 397

Color laser printer
Hide thumbs Also See for 3130cn:
Table of Contents

Advertisement

Clutch and Solenoid name
(Diag. Code)
K Mode Solenoid (DO-61)
(Color Mode Switching Sole-
noid)
Version 1 2007.12.28
NOTE:This procedure is for the technical staff.
When performing operation for five minutes or longer with the front
cover open, remove all toner cartridges, and cover the drum to avoid
exposure to light.
1)
Open the Front Cover.
2) Remove the Cover Rear.
3) Remove the Cover Side R Assy.
4) Remove the Drive Assy K.
5) Cheat the Safety Interlock System.
6) Turn on the power and enter the Diagnostic Mode.
7) Execute the DO-61.
8) Check the K Mode SOLENOID movement.
9) Press the "Cancel" key to stop the test.
10) Replace the Safety Interlock System.
11) Replace the Drive Assy K.
12) Replace the Cover Side R Assy.
13) Replace the Cover Rear.
14) Close the Front Cover.
2 - 43
Chapter 2 Operation of Diag.
Confirmation procedure
K Mode Solenoid
Zna02051KA

Advertisement

Table of Contents
loading

Table of Contents