Replacement 9
Use a wristband to protect the PWB from electrostatic damage.
2)-2
1)
Put the LOW VOLTAGE POWER SUPPLY on the SHIELD LVPS with holding up the rear
side of the LOW VOLTAGE POWER SUPPLY.
2)
Mate the notch of the LOW VOLTAGE POWER SUPPLY to the tab of the SHIELD LVPS to
attach the LOW VOLTAGE POWER SUPPLY.
Continues to the next page.
Version 1 2008.01.08
LOW VOLTAGE POWER SUPPLY (PL9.1.4)
1)
Chapter 3 Removal and Replacement Procedures (RRPs)
2)-1
3 - 113
Zna03307KA