Dell 3130cn Service Manual page 336

Step
Checking after replacing the feed roller
10 Replace the ROLL ASSY FEED MSI.
Does the error still occur when printing?
Checking after replacing the roller
Replace the SEPARATOR ROLLER ASSY MSI. (Refer to
11
Removal 41/ Replacement 3)
Does the error still occur when printing?
Checking the skewed mode
12
Is the skewed paper the duplex fed?
Checking the FEEDER ASSY DUP installation
13 Reseat the CHUTE ASSY DUP.
Does the error still occur when printing?
Checking the paper path.
14
Is there the foreign substance on the paper path?
Checking the paper installation Reseat the paper in the
15 paper cassette and reset the side and end guides.
Does the error still occur when printing?
Checking the paper path.
16
Is there the foreign substance on the paper path?
Checking after replacing the feed roller
17 Replace the FEED ROLLER.
Does the error still occur when printing?
Checking after replacing the roller.
18 Replace the SEPARATOR ROLLER ASSY MSI.
Does the error still occur when printing?
Version 1 2008.02.15
Check
1 - 310
Chapter 1 Troubleshooting
Yes
Go to step 11.
Replace the KIT
FEEDER ASSY.
(Refer to Removal
40/Replacement
4)
Go to step 13.
Go to step 14.
FEEDER ASSY
Remove the for-
eign substance. (Refer to Removal
5/Replacement
Go to step 16.
Remove the for-
eign substance.
Go to step 18.
Replace the KIT
FEEDER ASSY.
(Refer to Removal
40/Replacement
4)
No
End of work.
End of work.
Go to step 15.
End of work.
Replace the
DUP
39.)
End of work.
Go to step 17.
End of work.
End of work.