Removal 36 ROS (PL5.1.99)
16) Disengage the connector (P/J12) of the ROS (PL5.1.2) from the MACHINE CONTROL UNIT
(PL9.1.20).
17) Remove the CORE (PL5.1.22) from the harness of the ROS, and then pull out the connector
through the hole on the SHIELD REAR (PL9.1.11).
Continues to the next page.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
16)
17)-2
17)-1
3 - 68
Zna03221KB