Functions; Recording System; Exposure System; Development System - Dell 3130cn Service Manual

4. Functions

4.1 Recording System

Electro-photographic system employing OPC drum and direct transfer by the transport belt

4.2 Exposure System

Semiconductor four laser beams scanning system

4.3 Development System

Development with dry type 2-component developer

4.4 Fixing System

Thermal fixing system by Free Belt Nip Fusing (FBNF)

4.5 Resolution

- Main scanning direction:by the printer controller
- Sub scanning direction:600 dots/25.4mm (fixed)

4.6 Operation Mode

The printer can be operated in either of 4 operation modes. The modes are switched over by command
from the printer controller or change of printer operation, etc.
Proceeding from power ON, low power mode or sleep mode to standby mode will take place after going
through a warm up stage.
- Running mode
State in running or recording operation
Fixing system:
Exposure system:
Recording system:
- Ready mode
Ready state
Fixing system:
Exposure system:
Recording system:
- Sleep mode
Complete resting state. Compatible to E-Star and BAM requirement.
Fixing system:
Exposure system:
Recording system:
- Deep sleep mode
Resting state from the sleep state. Compatible to E-Star and BAM requirement.
Fixing system:
Exposure system:
Recording system:
Version 1 2007.12.28
Held at operating temperature.
Operating status
Operating status
Held at ready temperature.
Stop status
Stop status
Stop status
Stop status
Stop status
Stop status
Stop status
Stop status
8 – 8
Chapter 8 Printer Specifications