Replacement 31 OPERATOR PANEL (PL1.2.97)
4)
Replace the LATCH FRONT to the FRONT COVER by mating the two holes of the LATCH
FRONT with the studs on the FRONT COVER
5)
Secure the LATCH FRONT to the FRONT COVER using the two screws (silver, with flange,
tap, 10mm).
6)
Anchor the SPRING LATCH to the hole on the LATCH FRONT and the peg on the FRONT
COVER.
Continues to the next page.
Version 1 2008.01.08
Chapter 3 Removal and Replacement Procedures (RRPs)
6)
5)
3 - 160
5)
4)
Zna03133KA