Removal 20 Left Cover (Pl1.1.7) - Dell 3130cn Service Manual

Removal 20 LEFT COVER (PL1.1.7)

Steps 1 through 3 are for reference. Before removing this component, check that Steps 1 through 3
have been performed.
1) Open the FRONT COVER (PL1.2.1).
2) Remove the FUSER. (Removal 8)
3) Remove the REAR COVER. (Removal 10)
4)
5)
6)-2
4) Remove three screws (silver, tap, 10mm) that fix the LEFT COVER (PL1.1.7) to the printer.
5) Release the two holes on the LEFT COVER from the bosses on the printer.
6) Release the one backside hook and two front side hooks on the LEFT COVER, and then
remove the LEFT COVER from the printer by moving it diagonally backward.
Go to the next removal step:
Removal 21 LEVER FUSER AD (PL6.1.19), Removal 22 ARM ASSEMBLY (PL7.1.98),
Removal 23 LED ASSEMBLY (PL5.1.15), Removal 24 TONER DISPENSER MOTOR
(PL5.1.12), Removal 25 SHIELD ASSY ESS (PL9.1.45), Removal 31 TOP COVER (PL1.1.1)
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
6)-1
4)
5)
6)-1
6)-1
4)
3 - 35
Zna03032KA