Dell 3130cn Service Manual page 553

Removal 39 TONER CARTRIDGE SENSOR ASSEMBLY (K), (C), (M), (Y) (PL5.1.4)
Described below is the removal procedure common among the TONER CARTRIDGE
SENSOR ASSEMBLYs (C), (M), (Y), and (K).
Steps 1 through 9 are for reference. Before removing this component, check that Steps 1 through 9
have been performed.
1) Open the FRONT COVER (PL1.2.1).
2) Remove the FUSER. (Removal 8)
3) Remove the REAR COVER. (Removal 10)
4) Remove the RIGHT COVER. (Removal 11)
5) Remove the LEFT COVER. (Removal 20)
6) Remove the TOP COVER. (Removal 31)
7) Remove the INTERLOCK SWITCH. (Removal 37)
8) Remove the DRIVE ASSY K. (Removal 28)
9) Remove the PHOTOCONDUCTOR (PC) / DEVELOPER (DEV) DRIVE. (Removal 38)
Continues to the next page.
Version 1 2008.01.08
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 76