Fip-1.P14 Unfusing - Dell 3130cn Service Manual

FIP-1.P14 Unfusing

Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the paper condition
1
Is the paper in the tray new and dry one?
Checking the print cartridge.
2
Is the installed print cartridge the DELL cartridge?
Checking the FUSER installation
3 Reset the FUSER.
Is the image printed correctly?
Version 3 2008.05.30
Trouble substance
The printed image is not fixed on the paper properly. The image easily
comes off when rubbed.
Possible causative parts
- CARTRIDGE ASSY (PL5.1.18(K)/PL5.1.19(C)/PL5.1.20 (M)/PL5.1.21
(Y))
- FUSER ASSY (PL6.1.10)
Mnt01118KA
Check
Go to step 2.
Go to step 3.
End of work.
1 - 313
Chapter 1 Troubleshooting
Yes No
Replace the
paper with a new
and dry one.
Replace to the
DELL cartridge.
Replace the
FUSER. (Refer to
Removal 8/
Replacement 36)