The troubleshooting procedures described herein assume the use of the Diag
Tool. However, the procedures can be performed without the Diag Tool as long as
they are carefully followed.
1. Troubleshooting Overview
To increase the efficiency of troubleshooting, ensure that preliminary checks should be made to confirm
the trouble status before proceeding to the Fault Isolation Procedure (FIP), Operation of Diagnostic
(Chapter 2), Wiring Diagrams (Chapter 7), and Principles of Operation (Chapter 6).
1.1 Flow of Troubleshooting
Flow of the troubleshooting is as follows:
Version 2 2008.03.27
Check installation status
Check trouble status
Execute FIP
Check for recovery
End
1 - 1
Operation of Diagnostic
Principles of Operation
Wiring Diagrams
Reference
information
If the problem persists
Replace the Printer.
Chapter 1 Troubleshooting