Replacement 63 LEFT COVER (PL13.1.10)
3)
2)-1
3)
1)
Insert the front side of the LEFT COVER between the FRONT COVER and the printer, and
mate the two front side hooks of the LEFT COVER with the printer.
2)
Mate the mounting hole on the front side of the LEFT COVER with the boss of the printer,
and then insert the backside hook on the rear side of the LEFT COVER into the hole of the
printer.
When performing the step described below, take care to check the screw type. The
screws (silver, tap, 6mm) are used to secure the rear side of the LEFT COVER.
3)
Secure the LEFT COVER to the printer using the two screws (silver, tap, 10mm) and the two
screws (silver, 6mm).
Go to the next replacement step:
Replacement 64 COVER POLE L (PL13.1.11)
Version 1 2006.11.28
2)-2
1)-2
3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3)
2)-2
1)-1
1)-1
3 - 208
1)-1
Gnb03209KA