Flows 25 016-300/016-301/016-302/016-310/016-313/016-315/016-317/016-323/016 - Dell 3130cn Service Manual

Flows 25 016-300/016-301/016-302/016-310/016-313/016-315/016-317/016-323/016-

327/016-344/016-345/016-346/016-347 Restart / Erase Flash Err. 016-392 /
Write Flash Err. 016-393 / Verify Error 016-394
Download the latest version of
the firmware from the Dell
support website, and update the
firmware with "F/W Download DL
Mode". (Refer to Refernce_1.)
Yes
Replace the PWBA
ESS. (Removal 26/
Replacement 18)
Reference_1:
1. Make sure that the printer is connected to the computer via USB port or Parallel port (remove the
network cable). Then, try downloading as follows:
1) Power on the printer while pressing the <X Cancel> and < > buttons.
2) Press < > button to select "F/W Download DL Mode Parallel" or "F/W Download DL Mode
USB", and then press < > button.
3) The printer goes into the Download Mode with a message "Download Mode Ready. Then,
activate firmware update tool and follow the instruction displayed.
While the firmware download is being executed, the printer displays a message
"Writing...... F/W", and the computer displays a progress bar and may be restarted
during the downloading process. Never power off the printer or the computer until
the downloading process completes, and never interrupt the downloading pro-
cess.
Version 4.3 2009.08.21
Checking the error code.
Yes
Does the error
No
still occur when the
power is turned off
and on?
No
Error code is
016-317?
Check whether the version of the
firmware is the latest, referring to
the Printer Information via the
Tool Box.
Checked by [Printer Information]
of the [Printer Settings Report]
tab in Tool Box.
For the latest version information,
refer to the Dell Support Web
Site.
Yes
END
Replace the PWBA
ESS. (Removal 26/
Replacement 18)
1 - 61
Chapter 1 Troubleshooting
No
Is the firmware the
latest version?
Download the latest
version of the firmware
from the Dell Support
Web Site.