Toner; Dtb; Sheets; Drum - Dell 3130cn Service Manual

The default values are different in each printer.
Slow Scan Reg K to P
Slow Scan Reg 600 M, Y, C
Slow Scan Reg 1200 M, Y, C
Shifts the print area in this direction
by reducing the value.
Shifts the print area in this direction
by increasing the value.

6.9.3 Toner

Displays the Toner Dispense time and Toner Clearing count. (read only)

6.9.4 DTB

Displays the operating time of the Transfer Belt, the number of sheets fed and Toner Cleaning
count. (read only)
The Initialize buttons are to be used only when replacing the Transfer Belt.

6.9.5 Sheets

Displays the counter value of sheets fed from Fuser, Printer, SSF (SSI), Tray 1, Tray 2 and
Duplex. (read only)
Initialize buttons excluding [Life Fuser Sheets] are not to be used. [Life Fuser Sheets] is to be ini-
tialized when replacing the Fuser.

6.9.6 Drum

The rotating time of the Drum appears. (read only)

6.9.7 Custom

Information of the Custom appears. (read only)
Version 1 2007.12.28
Shifts the print area in this direction
by reducing the value.
Fast Scan Reg K to M, Y, C
Fast Scan Reg2 K to M, Y, C
Fast Scan Reg MP, Tray1,
Tray2
Fast Scan Reg DUP
Image Side
Default
Value
2 - 118
Chapter 2 Operation of Diag.
Shifts the print area in this direction
by increasing the value.
Default
Value
Kmy02041KA