Flows 62 Ready to Print 010-421
This error code is not a fault warning and only denotes that the Fuser ASSY is
approaching but has not reached its end of life.
Immediately prepare a new Fuser ASSY.
If this error code is displayed although the Fuser ASSY has been replaced only
recently, follow the following flow.
Version 3 2008.05.30
Checking the Fuser ASSY
installing.
Reseat the Transfer
ASSY(Belt Unit).
Yes
error still occur when
the power is turned
Replace the PWBA
MCU. (Removal 30/
Replacement 14)
1 - 115
Does the
No
off and on?
END
Chapter 1 Troubleshooting