Digital Input - Dell 3130cn Service Manual

6.2 Digital Input

This function checks whether the DI components operate normally or not. The DI test is performed
for all the DI components. A component should be selected from the drop down listbox. [Start] but-
ton shown on the screen should be clicked. [LOW] or [HIGH] is displayed on the [Result] screen.
The component operation is checked in such a way that the component status is changed from
[LOW] to [HIGH] and vice versa by operating the actuator or opening/closing the door. To stop the
operation, the [Stop] button on the screen should be clicked.
Items for the Digital Input Test are as follows.
K MODE SNR
DUP SNR
EXIT SNR
REGI SNR
IL OPEN
CRU Y
CRU M
CRU K
CRU C
CST2 LOW PAPER(Not Used)
CST2 NO PAPER
DUP FAN ALARM(Not Used)
Version 1 2007.12.28
Item
FDR MOTOR ALM(Not Used)
MSI NO PAPER
CST1 NO PAPER
MAI MOTOR ALM(Not Used)
SUB MOT ALM(Not Used)
OHP SNR (Not Used)
FAN ALM (Not Used)
PH MOTOR ALM (Not Used)
DEVE MOTOR ALM(Not Used)
CASSETTE1 SIZE
CASSETTE2 SIZE
2 - 67
Chapter 2 Operation of Diag.
Drop down Listbox
Item