Dell 3130cn Service Manual page 57

Problem
LCD
010-351
Restart Printer
Flip
Reseat Fuser
Contact Support
Fuser
010-359
Restart Printer
Flip
Reseat Fuser
Contact Support
Ready to Print
010-421
Flip
Replace Fuser
Contact Support
Tray Detached
024-946
Flip
Push In
Tray 1
Tray Detached
024-947
Tray
Flip
Push In
Tray 2
Load Tray 1
077-912
Flip
Push In
Tray 1
Close FrontCover
077-300
Cover
Flip
Open
Front Cover
Is Open
Version 3 2008.05.30
Error Message
Status Window
The Fuser needs to be
replaced now.
Remove the used Fuser
and install a new one.
Please click the Show
Me How Button for
details.
010-351
An unsupported Fuser is
installed.
Open the Front Cover.
Remove the unsup-
ported Fuser and install
a supported one.
Please click the Show
Me How Button for
details.
010-359
Contact customer sup-
port if this failure is
repeated.
010-421
No Message.
No Message.
Insert Tray 1.
Tray cannot be detected.
077-912
The Front Cover is
open.
Close the Front Cover.
077-300
Error Contents
<IOT Fuser Life Over>
The Fuser Counter has reached the
replacement time.
<IOT Fuser CRUM ID Error>
The Fuser CRUM ID error is
detected.
The Fuser CRUM ID read by the sen-
sor is different from the one that was
recorded.
<IOT Fuser Life Warning>
The Fuser Counter is going to reach
the replacement time.
<IOT Tray Detached>
The paper cassette(Tray1) is
detached.
The Tray Size Switch detected the no
tray.
<IOT Tray Detached>
The paper cassette(Tray2) is
detached.
The Tray Size Switch detected the no
tray.
<Upper Cassette Detached>
The Tray 1 paper cassette is
detached when the tray 2 is selected.
The Tray Size Switch detected the no
tray.
<IOT Cover Front Open>
The Front Cover is open.
1 - 31
Chapter 1 Troubleshooting
FIP to be
referred
Flows 22
FIP1.22
Flows 61
FIP1.61
Flows 62
FIP1.62
Flows 63
FIP1.63
Flows 64
FIP1.64
Flows 63
FIP1.63
Flows 65
FIP1.65