Replacement 23 ELECTRONIC SUB-SYSTEM CONTROL BOARD (PL9.1.27)
9)
Secure the SHIELD ASSY IF and ELECTRONIC SUB-SYSTEM CONTROL BOARD to the
printer using the seven screws (silver, 6mm).
10) Engage all the connectors of the ELECTRONIC SUB-SYSTEM CONTROL BOARD.
11) Close the SHIELD WINDOW and secure the SCREW KNURLING.
Go to the next replacement step:
Replacement 24 LEFT COVER (PL1.1.7)
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
9)
9)
9)
9)
9)
3 - 114
10)
9)
11)
9)
Kmy03094KB