Print Info; Executing Print Info; Config Page; Print Settings - Dell 3130cn Service Manual

4.2 Print Info

Prints out the detailed printer settings and configuration information.

4.2.1 Executing Print Info

1) Turn off the power.
2) Turn on the power while holding down "
3) Release the fingers from these keys when "Diagnosing..." is displayed.
4) The "Customer Mode" and "IOT Diag" are displayed. (Entered the Diag. mode.)
5) Press " " to select "Print Info", and then press "
6) Press " " and "
7) Press " " key twice to execute the setting.
To exit the print or to returning to one step higher menu, press "CANCEL" key.

4.2.2 Config Page

The version of software of IOT and the printer configuration can be confirmed by executing this
test.

4.2.3 Print Settings

The service tag, printing count value and error count value can be confirmed by executing this test.

4.3 Complete

Completes the diagnosis operation and reboot the data.
4.3.1 Executing Print Info
1) Turn off the power.
2) Turn on the power while holding down "
3) Release the fingers from these keys when "Diagnosing..." is displayed.
4) The "Customer Mode" and "IOT Diag" are displayed. (Entered the Diag. mode.)
5) Press " " to select "Complete", and then press "
6) Press " " key twice to execute the setting.
To exit the operation or to returning to one step higher menu, press "CANCEL" key.
Version 1 2007.12.28
" key to select the item.
2 - 44
" and " " keys.
" key.
" and " " keys.
" key.
Chapter 2 Operation of Diag.