Removal 8 Fuser (Pl6.1.10) - Dell 3130cn Service Manual

Removal 8 FUSER (PL6.1.10)
The FUSER part is very hot. Take added care not to get burned when performing the ser-
vice operation.
1) Open the FRONT COVER (PL1.2.1).
3)
2) Open the DUPLEX GATE (PL6.1.13).
3) Lift the LEVER FUSER D (PL6.1.18) and LEVER FUSER AD (PL6.1.19) up to release the
lock of FUSER (PL6.1.10).
4) Shift the FUSER toward you to disengage the FUSER connector (P/J171).
5) Remove the FUSER from the printer.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
5)
2)
4)
3 - 15
3)
Zna03011KB