Replacement 44 550 TRAY FEED ROLLER (PL12.3.29) & 550 TRAY SEPARATOR
When replacing the 550 TRAY SEPARATOR ROLLER or the 550 TRAY FEED ROLLER
replace the 550 TRAY SEPARATOR ROLLER and the two 550 TRAY FEED ROLLERs at
the same time.
1)
Slide the 550 TRAY SEPARATOR ROLLER onto the SHAFT SEPARATOR so that the lug on
the 550 TRAY SEPARATOR ROLLER is mated with the notch on the CLUTCH FRICTION
SPRTR (PL12.5.16). Lock the hook on the other end of the 550 TRAY SEPARATOR ROLLER
into the groove on the SHAFT SEPARATOR.
2)
Close the CVR SPRTR CST.
Continues to the next page.
Version 1 2008.01.08
ROLLER (PL12.5.17)
Chapter 3 Removal and Replacement Procedures (RRPs)
2)
3 - 177
1)
Kmy03121KA