Dell 3130cn Service Manual page 549

Removal 38 PHOTOCONDUCTOR (PC) / DEVELOPER (DEV) DRIVE (PL8.1.2)
Steps 1 through 8 are for reference. Before removing this component, check that Steps 1 through 8
have been performed.
1) Open the FRONT COVER (PL1.2.1).
2) Remove the FUSER. (Removal 8)
3) Remove the REAR COVER. (Removal 10)
4) Remove the RIGHT COVER. (Removal 11)
5) Remove the LEFT COVER. (Removal 20)
6) Remove the TOP COVER. (Removal 31)
When performing the step described below, it is not necessary to disengage the connec-
tor of the INTERLOCK SWITCH.
7) Remove the INTERLOCK SWITCH. (Removal 37)
When performing the step described below, it is not necessary to disengage the connec-
tor of the DRIVE ASSY K.
8) Remove the DRIVE ASSY K. (Removal 28)
Continues to the next page.
Version 1 2008.01.08
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 72