Dell 3130cn Service Manual page 517

Removal 22 ARM ASSEMBLY (PL7.1.98)
12) Release the hook of the SHAFT PIVOT that fixes the LINK L (PL7.1.3) to the FRONT
COVER, and then remove the LINK L from the FRONT COVER by pulling the SHAFT PIVOT
to the outside.
13) Remove the two screws (silver, tap, 10mm) that fix the SUPPORT LINK L (PL7.1.2) to the
printer.
14) Remove the SUPPORT LINK L from the printer.
Continues to the next page.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
13)
14)
13)
3 - 40
12)-3
12)-2
12)-1
Zna03206KB