Replacement 22 ARM ASSEMBLY (PL7.1.98)
1)
Replace the HOLDER DAMPER to the printer together with the DAMPER OIL.
2)
Replace the SPRING SUPPORT to the printer
3)
Replace the LINK L by mating the backside groove on the LINK L with the boss on the printer
and pulling the DAMPER OIL slightly upward.
Continues to the next page.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
3)-1
2)
1)
3)-2
3 - 141
Zna03321KB