Replacement 22 ARM ASSEMBLY (PL7.1.98)
7)
Replace the HOLDER DAMPER to the printer together with the DAMPER OIL.
8)
Replace the SPRING SUPPORT to the printer.
9)
Replace the LINK R by mating the backside groove on the LINK R with the boss on the printer
and then pulling the DAMPER OIL slightly upward.
Continues to the next page.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
9)-1
8)
7)
9)-2
3 - 143
Zna03323KB