Flows 5 003-356 Restart Printer - Dell 3130cn Service Manual

Flows 5 003-356 Restart Printer

Checking the failure parts
Press the " ", the " " and the " " keys on the Control Panel when displaying the error code.
The failure parts code (address code on a memory) is displayed on the LCD.
The part corresponding to failure parts code (address code on a memory) is shown below.
Code
1000-1FFF: EEPROM of PWBA MCU
3100-31FF: HVPS
3800-38FF: PWBA EEPROM XPRO
3A00-3AFF: Belt CRUM
3C00-3CFF: Fuser CRUM
Handle these codes as follows:
- When "1000-1FFF" is displayed: Replace the PWBA MCU. (Refer to Removal 30/
Replacement 14.)
- When "3100-31FF" is displayed: Replace the HVPS (Refer to Removal 34/ Replacement 10.)
- When "3800-38FF" is displayed: Replace the Printer
- When "3A00-3AFF" is displayed: Reseat the TRANSFER ASSY. If the error code appears
again, replace this part. (Refer to Removal 4/Replacement 40.)
- When "3C00-3CFF" is displayed: Reseat the FUSER ASSY.
Version 3 2008.05.30
Checking the error
Yes
1 - 40
Chapter 1 Troubleshooting
Does the error
No
still occur when the
power is turned off
and on?
END